As características fosforescentes do benzo[b]nafto[2,3-d]tiofeno (BNT) foram estudadas sob diferentes condições experimentais. Melhores resultados foram obtidos utilizando-se Tl(I) e Pb(II) como indutores de fosforescência, em ambos os casos usando dodecilsulfato de sódio (SDS) como modificador de superfície. Nestas duas condições, curvas analíticas de 3 ordens de magnitude forneceram limites de detecção e quantificação de respectivamente 0,6 e 2,0 ng na presença de Tl(I) e 3,2 e 10,7 ng na presença de Pb(II). A potencialidade da metodologia desenvolvida para determinação de BNT em nível de traços foi testada usando amostras de sedimento enriquecidas com o analito de interesse e Pb(II) como átomo pesado seletivo para indução de fosforescência. A recuperação de BNT foi bastante satisfatória (101,5±7,4%, n=6) indicando que o método pode ser aplicado para a análise de amostras complexas. A interferência de outros hidrocarbonetos policíclicos aromáticos (pireno, criseno, carbazol, 7,9-dimetilbenzo[c]acridina e dibenzotiofeno) foi avaliada e o método foi considerado seletivo na presença destas substâncias.
Room-temperature phosphorescence characteristics of benzo[b]naphtho[2,3-d]thiophene (BNT) were studied under several experimental conditions. Best phosphorescence was obtained using Tl(I) and Pb(II) as heavy atom enhancers, both in the presence of SDS as surface modifier. Under these two conditions of maximum phosphorescence, working curves with three orders of magnitude were achieved and absolute limits of detection and quantification of respectively 0.6 and 2.0 ng in the presence of Tl(I) and 3.2 and 10.7 ng in the presence of Pb(II). The RTP potential for selective trace-level determination was tested using a sediment sample spiked with BNT and using Pb(II) as the selective heavy atom enhancer. The recovery of BNT was very satisfactory (101.5 ± 7.4%, n = 6) indicating that the method can be properly applied for the analysis of complex samples. The interference potential from other polycyclic aromatic hidrocarbons (pyrene, chrysene, carbazole, 7,9-dimethylbenz[c]acridine and dibenzothiophene) was evaluated and the method was considered selective in the presence of these substances.